Hire electrician in Pakistan who does the job safely and properly
Electrical problems in Pakistani homes are a fact of life. Voltage swings, load-shedding, overloaded circuits in summer, old wiring in older houses and quick fixes by previous electricians all add up. A breaker that trips every time the iron and the air conditioner run together. A socket that sparks. A UPS that never charges properly. A fan that hums but will not spin. These problems are annoying, and some of them are dangerous.
RX Direct helps families and businesses hire an electrician in Pakistan who is skilled, honest and checked. We test every electrician on real tasks, agree the price before work starts and stand behind the job. This page explains what our electricians do, how pricing works, and how to keep your home's electrical system safe.
Home electrician Pakistan: the jobs we handle
A home electrician in Pakistan through RX Direct can handle:
- Wiring: new wiring, rewiring old houses, adding circuits and points
- Switchboards and sockets: replacing damaged boards, adding sockets, fixing loose connections
- Distribution boards: installing or upgrading DB boxes, breakers and RCDs
- Lighting: installing lights, chandeliers, LED strips, outdoor and security lights
- Fans: ceiling fans, exhaust fans and wall fans, including regulators
- Fault finding: tracing short circuits, tripping breakers and dead points
- Earthing: installing and testing proper earthing
- Backup power: UPS and inverter installation, battery connections, changeover switches
- Stabilisers: installing voltage stabilisers for appliances
- Solar: wiring support for solar panel systems and connections to the home supply
- Air conditioners: dedicated circuits and electrical connections for AC units
- Geysers and motors: electrical connections for electric geysers and water pumps
Verified electrician Pakistan: our checks
A verified electrician in Pakistan sent by RX Direct has passed:
| Check | What we do |
|---|---|
| CNIC | Original examined and matched to the person |
| Address | Current and permanent address confirmed |
| References | Previous clients or contractors called |
| Practical test | Wiring a board, fault finding and safety procedures |
| Tools | Tester, multimeter and basic tools confirmed |
| Safety knowledge | Isolation, earthing, wire gauge and breaker sizing |
Electrical work done badly can cause fires and shocks. Our tests focus on safety as much as speed.
Electrician service Pakistan: how a job works
Our electrician service in Pakistan follows clear steps:
- Describe the problem. Send photos or a short video of the issue, plus your city and area.
- Estimate. For simple jobs, we share a likely price range. For bigger work, the electrician visits to assess.
- Approve. You agree the price and materials before any work starts.
- Work. The electrician completes the job safely, tests everything and cleans up.
- Check and pay. You pay once satisfied. If the same problem returns soon, we send the electrician back.
Electrician provider Pakistan: pricing
As an electrician provider in Pakistan, we price per job rather than per hour:
| Job type | How it is priced |
|---|---|
| Small repairs: socket, switch, fan installation | Fixed price per item |
| Fault finding | Visit charge, adjusted if repair goes ahead |
| Rewiring a room or floor | Quoted after assessment |
| DB box or breaker upgrade | Quoted with materials |
| UPS or inverter installation | Quoted per system |
| Monthly maintenance | Fixed monthly fee for agreed checks |
Materials are either bought by you or billed at cost with receipts. Any change in scope is agreed before continuing. See our Pricing page for more.
Residential electrician Pakistan: common problems we fix
A residential electrician in Pakistan sees the same problems again and again:
Tripping breakers in summer. Usually too many heavy appliances on one circuit. The fix is redistributing load and using correctly rated breakers, not just replacing the breaker with a bigger one, which is dangerous.
Burnt sockets. Caused by loose connections, cheap sockets or overloading. Replace with good quality sockets and check the wiring behind.
Flickering lights. Often a loose neutral or failing connection. Needs checking before it causes damage.
UPS not charging. Can be battery age, wiring or the UPS itself. A good electrician diagnoses before replacing.
Shocks from appliances. Usually missing or faulty earthing. This is dangerous and should be fixed immediately.
Voltage problems. Low or high voltage damages appliances. Stabilisers protect sensitive equipment.
Electrician near me: availability by city
When people search for an electrician near me, they usually need help quickly. We provide electricians in Islamabad, Rawalpindi, Lahore, Karachi, Faisalabad, Multan, Peshawar and Gujranwala. Same day visits are most likely in the twin cities.
Electrical technician Pakistan: safety rules we follow
An electrical technician in Pakistan working through RX Direct follows basic safety rules:
- The supply to the circuit is switched off before work starts
- Wire gauge matches the load: thicker wire for AC and geyser circuits
- Breakers are rated correctly for the wire and load
- Joints are made properly inside boxes, never left taped in walls
- Earthing is provided for appliances that need it
- Everything is tested before the electrician leaves
If an electrician suggests skipping any of these to save money, it is a warning sign.
Before summer: an electrical check
Summer puts the heaviest load on home wiring. Before May, it is worth having an electrician check:
- Air conditioner circuits and breakers
- Main DB box connections, which loosen over time
- UPS batteries and connections for load-shedding season
- Water pump and motor connections
- Any socket that feels warm when in use
A pre-summer check costs far less than repairing fire damage or replacing burnt appliances.
Solar and backup power
More households are installing solar panels and larger backup systems to cope with rising electricity bills and load-shedding. Solar systems involve DC wiring, inverters, batteries and connection to the home supply. Our electricians support the wiring and integration with your existing system. For the panels and inverter equipment themselves, many families work with a solar supplier, and our electrician can check that the connection to your home wiring is safe.
Electrical work in older houses
Houses built twenty or thirty years ago in areas like Satellite Town, Model Town, PECHS, Gulberg and the older sectors of Islamabad were wired for far fewer appliances than families use today. Rubber insulated wires harden and crack with age, aluminium wiring causes loose connections, and DB boxes may have no proper breakers at all. Rewiring is a bigger job, but in older homes it is often the safest long term choice. An electrician can assess the condition and suggest whether partial or full rewiring is needed.
Cutting electricity bills safely
With electricity tariffs rising every year, many families ask electricians how to reduce their bills. Practical steps an electrician can help with include replacing old tube lights and bulbs with LED fittings, fitting energy efficient fans with modern regulators, checking that air conditioners have proper wiring so they run efficiently, separating heavy loads onto their own circuits, and finding hidden faults such as earth leakage that waste power and trip breakers. Inverter air conditioners and efficient motors also help, though they are a larger investment.
A useful habit is checking your meter at night when most appliances are off. If it is still moving quickly, something is drawing power that should not be, and an electrician can trace it.
Electrical safety for families with children
Children are naturally curious about sockets and wires. Simple steps reduce the risk: socket covers or shuttered sockets in children's reach, no loose extension cords across floors, switchboards fixed firmly to the wall, and an RCD or earth leakage breaker on the main board that cuts power quickly if someone gets a shock. Ask your electrician to fit an RCD if your DB box does not have one. It is one of the most effective safety devices in any home.
Signs you should call an electrician now
Some electrical problems can wait for a convenient visit. Others should not. Call an electrician urgently, and switch off the affected circuit or the main supply, if you notice a burning smell from a socket or switchboard, scorch marks or melting on plugs, sparks when plugging something in, a buzzing sound from the DB box, a mild shock from a tap, appliance or metal fixture, or a breaker that trips again immediately after being reset. These are signs of a fault that can lead to fire or serious injury.
Electricians for offices and shops
Offices, shops and clinics need reliable power and safe wiring for computers, lighting and air conditioning. We provide electricians for installations, repairs and monthly maintenance. Businesses can arrange regular visits to check DB boxes, backup systems and emergency lighting.
What to prepare before the electrician arrives
To save time on the visit, have these ready:
- Photos or a short video of the problem
- Where the main switch and DB box are located
- Access to the roof or ceiling space if wiring runs there
- Your preferred brands for switches, sockets or breakers, if any
- A clear idea of where you want new points or lights
Hire an electrician today
Send the problem, a few photos and your city and area on WhatsApp at +92 322 1223666. Mention if it is urgent. See also our home repair and trade staff page.









